123.HP.COM/OJ4630 Printer Tech Support

Call Toll-Free No.: 1-844-494-9030

123.hp.com/oj4630 - Wi-fi Network Setup

Wi-Fi network setup

123.hp.com/oj4630 Setup Requirements:

  • A laptop or desktop that supports wireless networking
  • A working wireless connection with a router.
  • Network name (SSID)
  • WEP key or WPA pass phrase.

Steps to follow:

  • On the HP Officejet 4630 printer’s control panel, push the Wireless button followed by the Settings option.
  • Now, scroll through the options to select Wireless Setup Wizard. Select OK.
  • Follow the on screen prompts to setup the connection.
  • Insert the software CD that came with the HP Officejet 4630 printer in the computer/laptop.
  • Now, follow the instructions displayed on screen to complete the installation process.

123.hp.com/oj4630 – Auto Wireless connect

HP Auto Wireless Connect is one of the most sought after technologies that will enable you to connect your HP Officejet 4630 printer to the existing wireless network automatically without asking to connect or use any cables. Also, this technology will not prompt you to enter your wireless network settings such as the username or password. Several latest versions of HP printers will have this unique capability when you install the HP software for the first time.

You can make use of HP Auto Wireless Connect by installing the software on your printer. After installing, follow the directions on screen carefully. When asked, choose the Network(Ethernet/Wireless) connection type. From the options available, select ‘Yes, send my wireless settings to the printer (recommended)”. Your job is almost done and the HP software will take care of the rest.

Connect Ethernet

Connect Ethernet

  • Take out the software CD that came with the printer and insert it in the CD-ROM drive. (NOTE: Do not connect the USB cable to your HP Officejetprinter untilthe printer asks you to do so.)
  • Carefully, follow the instructions displayed on screen. When you areprompted, select USB option on the Connection Options screen.
  • Complete the process by following the on-screen prompts on your HP Officejet 4630 screen.

NOTE: If you have successfully installed the software, the printer will function asplug-and- play printer. If you have failed in installing the software, insert the CDagain and follow the same process.

OJ 4630 Printer Support

123.hp.com/oj4630

First time unboxing and printer setup

First time unboxing and printer setup

  • Get the 123.hp.com/oj4630 printer out of the box.
  • Now, remove the cello tape and packing materials.
  • Lift the scanner lid and take off the packing tape. Close the lid later.
  • Hold the printer on either sides and then lift the ink cartridge access door until it snaps into itsplace. Now, remove all the package tape from the printer.
  • After removing the tapes, close the ink cartridge access door.
  • Pull out the paper tray and remove the tapes. Push the trap until it locks into its place.
  • Connect one end of the power cord to the wall socket and the other end to the printer.
  • Switch on the printer.
  • Select the down arrow on your printer control panel to set the language.
  • Press the same arrow to choose Yes and then tap on OK. Now, Set Country/Region menu willopen.
  • Select the down arrow to choose the country/region and then tap on OK.
  • Pull out the paper tray door and then the paper tray extender. Now, lift the paper catch.
  • Move the paper guides to their outermost position.
  • Place a stack of paper on to the paper tray. Adjust the paper guides according to the size of the paper.
  • Now, push the paper tray in till it snaps into place.
  • Open the ink cartridge door. Wait till the print carriage moves to the right and remain silent.
  • Remove the tapes from the ink cartridges. Hold the cartridges on the black plastic.
  • Hold the cartridges on their sides and then gently push them forward until it locks in its place.
  • Now, repeat the process until you insert all ink cartridge.
  • Now, close the ink cartridge door. Now, align the cartridges by following the on-screen instructions. The printer will print an alignment page.
  • Get oj4630 Printer driver from 123.hp.com/oj4630 or 123.hp.com/setup 4630.

Scan a photo or document on the 4630

Scan a photo or document on the 4630

  • How to scan documents as editable text (Windows)?
    • Place the original document print side up on the automatic document feeder or print side down on the scanner glass.
    • Go to the Print, Scan & Fix option under the Scan a Document or Photoin your HP Officejet 4630 printer software.
    • From the list of options, choose the type of editable text you want to.
    • Touch Scan and follow the on screen prompts.

    How to scan documents as editable text (OS X)?

    • Place the original document print side up on the ADF or print side downon the scanner glass.
    • Go to Applications/Hewlett Packard and open HP Scan.
    • Choose the type of editable text you want.
    • Follow the instructions displayed on screen to complete the scan process.

    Connect a USB flash drive to the HP Officejet 4630 printer and you will be able to scan directly to the flash drive.

    How to scan an original to a memory device from the printer’s control panel?

    • Place the original document print side up on the ADF or print side down on the scanner glass of the HP Officejet 4630 printer.
    • Insert a USB drive.
    • Choose Scan option and then tap on Memory Device.
    • Change any other scan options and then tap on Start Scan.
  • Get oj4630 Printer driver from 123.hp.com/oj4630 or 123.hp.com/setup 4630.